旧环氧地坪破损会影响它对地面的保护作用，容易起灰、起砂。灰尘进入机械内又会造成机械的损坏，所以，这时候就需要对旧环氧地坪翻新处理。下面介绍环氧地坪翻新施工方案。1、清除旧环氧地坪。对于旧环氧地坪要先使用专业的环氧消磨设备将其完全清除，这个第一步都是统一的，然后再根据不同的环氧地坪类型进行施工。

The old epoxy floor damage will affect its protection to the ground, easy to start ash and sand. Dust into the machinery will cause damage to the machinery, so it is necessary to renovate the old floor at this time. The following is an introduction to the renovation plan for epoxy floor. 1. Remove the old epoxy floor. For the old epoxy flooring, professional epoxy grinding equipment should be used to remove it completely. This first step is unified, and then construction is carried out according to different types of epoxy flooring. 2、清除油垢。如果地面有油污，要先将其清楚，再根据实际情况进行脱脂、脱油，确定表面干净后方可施工。

2, remove grease stain. If there is oil pollution on the ground, it should be clear first, then degrease and degrease according to the actual situation, and make sure that the surface is clean before construction.

3、裂缝处理。材料和施工质量不好往往会造成地面裂缝产生，如果发现裂缝可以使用切割机把裂缝切成V形槽，然后灌入环氧砂浆使其平整即可。

3, crack treatment. Poor material and construction quality often lead to ground cracks. If cracks are found, a cutting machine can be used to cut the cracks into V-shaped grooves and then pour epoxy mortar into them to make them flat.

4、坑洞处理。地面坑洞会使地面难以找平，建议使用打磨机打磨，将地面有空鼓的地方铲除，再用砂浆或是水泥进行坑洞处理。

4, pothole processing. Ground holes will make it difficult to leveling the ground. It is suggested to use a grinder to grind the hollow areas of the ground, and then use mortar or cement to treat the holes.