环氧树脂自流平地坪由于其美观，耐用，防尘，所以主要适用于对洁净要求高的医药生产车间，电子厂房和办公室等区域。环氧树脂自流平地坪的美观主要因为该环氧地坪材料具有优良的流平性，可以自己自动流平，所以平整度高，光泽度高。但在环氧自流平实际施工过程中，偶尔会出现环氧地坪发花的问题，原因主要是以下这些原因：

Because of its beauty, durability and dust-proof, epoxy resin self-leveling floor is mainly suitable for areas such as pharmaceutical workshop, electronic workshop and office which require high cleanliness. The beauty of epoxy resin self-leveling floor is mainly due to its excellent leveling property and self-leveling, so it has high smoothness and gloss. However, in the actual construction process of epoxy self-leveling, occasional flooring problems occur, mainly due to the following reasons: 1、表面有小气泡，整体颜色深浅不一致，地坪局部出现发白。

1, there are small bubbles on the surface, the overall color is not consistent, and the floors appear white.

这主要是因为环氧自流平的材料消泡能力差，可选择更强的消泡剂进行消泡处理，同时可以调整填料和活性稀释剂的比例，减少填料，增加火星稀释剂；再者选择黏度小，但固化时间长的固化剂。

This is mainly due to the poor defoaming ability of epoxy self-leveling materials, so stronger defoamers can be selected for defoaming treatment. At the same time, the proportion of fillers and active diluents can be adjusted to reduce fillers and increase Mars diluents; furthermore, curing agents with low viscosity but long curing time can be selected.

2、出现局部颜色不一。

2, the local color varies.

环氧树脂自流平材料配置时使用杂牌树脂，导致对颜料分散系统造成干扰。

When epoxy resin self leveling material is used, the use of miscellaneous resin will cause interference to the pigment dispersing system.

3、灰色的材料容易发花

3, grey materials are easy to flower.

颜料中钛白比较重，碳黑最轻，这导致在配置灰色的材料时，两种颜色颗粒由于重量的原因出现分层。一般要求一份黑他碳需要一分助剂，大约两分环氧和两份活性稀释剂来配制色浆，一般研磨三遍以上。

Titanium dioxide is heavier and carbon black is lightest in the pigments, which results in the layering of two color grains due to weight. Usually one black carbon needs one assistant, about two epoxy and two active diluents to prepare color paste, generally grinding more than three times.